Threaded fittings used in the water industry use a standard BSP thread. What this means is that the pitch and size have are all the same regardless of the Country or manufacturer. There is one exception to this and that is America.
The standard thread sizes are 1/4" 1/2" 3/4" 12 11/4" 11/2" 2" and so on. This however is not the end of the story because you cannot just measure a thread with a steel rule and the from this measurement assume that the imperial equivalent is the size of the thread. As an example if you were to measure a male thread and it measured 26.5 mm outside diameter then the natural assumption would be to assume that it was a 1" BSP thread. Oh no you would be wrong because this would in actual fact be a 3/4" BSP thread.
To successful identify your thread size that you are trying to match up with please click here
To seal a thread on a water pipe fitting you would use a PTFE tape. On the male thread wrap 3 or 4 wraps of PTFE tape round thread. The larger the fitting the more PTFE tape will me needed. Now thread the female fitting on to the male fitting and providing it is quite stiff to turn the fittings should now be waterproof
Threaded Bush 11/4" Male - 1" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and...
Threaded Bush 11/4" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and...
Threaded Bush 11/2" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and...
Reducing Nipple 2" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 2" - 11/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 1" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Threaded Elbow 3" Female Thread
Made In The EU
10 Bar Rated
For more information on British Standard Pipe Thread and how to measure the thread please click here
Threaded Elbow 1" Male BSP - 1" Male Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread...
Tank Connector 2 Inch BSP Thread This is a polypropylene tank connector with a 2 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length...
Threaded Bush 11/2" Male - 11/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and...
Rubber Washer For Back Nuts Suitable For 1" BSP Threads Rubber Back washer Made in Europe outside diameter40 mm Inside Dimeter of hole 30 mm Thickness 3mm width of rubber...
Threaded Elbow 1/2" Male BSP - 1/2" Male Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread...
Tank Connector 11/2 Inch BSP Thread This is a polypropylene tank connector with a 11/2 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length...
Tank Connector 1/2 Inch BSP Thread This is a polypropylene tank connector with a 1/2 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length of thread. ...
Threaded Bush 3" Male - 2" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and...
Threaded Socket 3" Female Bsp - 3" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how...
Equal Tee Female Thread 11/4"
Made In The EU
10 Bar Rated
For mnore information on British Standard Pipe Thread and how to measure the thread please click here
Tank Connector 1 Inch BSP Thread This is a polypropylene tank connector with a 1 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length...
Tank Connector 3/4 Inch BSP Thread This is a polypropylene tank connector with a 3/4 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length...
Hansen 11/4" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that...
Hansen 11/2" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that...
Hansen 2" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that...
Hansen 1/2" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that...
Hansen 1" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that...
Sale
Subscribe To Our Newsletter
Choosing a selection results in a full page refresh.
