Barbed pipe fittings should only be used with LDPE Pipe ( Low density polyethylene pipe). Low density polyethylene pipe can be used on the surface or just below the surface. The pipe is 4 bar rated and the fittings are 6 bar rated.
Installation tips
The LDPE pipe will need to be warm prior to the installation of a barbed fitting. This will make sure that the fitting is easy to push in and will allow the pipe to shrink back on to the barbs making a tough durable and reliable fitting
Barbed Straight Connector 16mm Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The connector is made from a strong industrial grade UV stabilised plastic....
16mm Barbed Elbow Joint Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The elbow is made from a strong industrial grade UV stabilised plastic....
Barbed Stopend For 16mm Outside Diameter Pipe The stopend is used to terminate the end of 16mm outside diameter or 13mm inside diameter pipe. The large barbs make sure that...
Barbed 16mm Tee Joint Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The connector is made from a strong industrial grade UV stabilsed...
Barbed 16mm Control Valve The barbed control valve is ideal for restricting flow or turning off the flow to certain parts of the system. The valve can be used in...
Reducing Push Fit Tee 20mm x20mm x16mm Can be used with any LDPE 20mm or 16mm. The connector is made from a strong industrial grade UV stabilsed plastic. The...
20mm - 3/4" Swivel Connector Female Thread The 20 mm - 3/4" female threaded swivel tap connector is ideal for connecting 20mm pipe to any outside tap or timer. The...
Barbed Reducing Straight Connector 20mm - 16mm Used to reduce 20mm LDPE outside diameter pipe to 16mm. This is ideal when you are using long runs of pipe. Using 20mm...
Barbed Connector 20mm Barbed connector joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because...
16mm barbed Stopend With Drain Cap This 16mm barbed stopend has a removable cap to allow lines to be drained down as required. The cap has an O ring inside...
Ball Valve 16mm Barbed - 3/4" BSP Male Thread Made in Europe from industrial grade plastic. A simple ball valve that can be used with 16mm LDPE external diameter pipe...
16 mm Foldover Stopend The foldover stopend is probably the most positive stopend available for 16mm LDPE pipe when using a push fit system. Foldover stopends are quicker to use...
20mm Barbed Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal...
Tavlit Push Fit Y Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe....
Tavlit Push Fit 4 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip...
Tavlit Push Fit 3 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip...
Tavlit Push Fit 3 Way Connector 16mm - 3/4" BSP This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm...
Tavlit Push Fit Y Connector 20mm - 3/4" This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe. Tavlit fittings...
Subscribe To Our Newsletter
Choosing a selection results in a full page refresh.
