Pop up sprinklers for the lawn and garden are almost considered a dark art. The reason is because so many people have managed to get it wrong and this is then very frustrating and disappointing when a sprinkler does not pop up or water just dribbles out of the nozzle. The biggest problem occurs when to many sprinklers or to big a pop up sprinkler is connected to a system which does not have enough water volume or water pressure. We would suggest calling us on 01189736905 or send an email tosales@easy-irrigation.co.ukso that we can give you the best advice and make sure your new pop up system works from day one. If you would rather take advantage of our free design and planning service then please click the link
Hunter 4" High Pro-spray body With Check Valve The Hunter Pro-Spray body is unlike a gear driven pop up because the water is distributed as a constant fan around the...
HUNTER Pro Spray Pressure Regulated Body 4" Riser The pressure regulated riser makes sure that each nozzle works at its optimum pressure. This body is very good when used in...
HUNTER Pro Spray 2.8 Pressure Regulated Body 4" Riser With Check Valve Hunter’s revolutionary MP Rotators use multi-stream technology to deliver accurate streams of water with superior uniformity. When used...
Hunter Shrub Adapter With 2.5 Bar Pressure Regulator The Hunter Shrub adapter will convert any 1/2" Male BSP thread so that in can be used with an MP rotator nozzle. ...
Hunter Spiral Barbed Elbows 1/2" BSP Male Thread Hunter Spiral Barb Elbows are particularly unique because instead of using a series of graduated barbs, Hunter’s elbows have a single spiral...
Hunter Spiral Barbed Elbows 3/4" BSP Male Thread Hunter Spiral Barb Elbows are particularly unique because instead of using a series of graduated barbs, Hunter’s elbows have a single spiral...
Hunter Heavy Duty PVC Swing Arm 1" BSP Male x 1" BSP Male Thread 12" Length An essential product to use when installing pop ups. The swinging arm has 2...
Hunter Swinging Arm 6" x 3/4" x 1/2" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere...
MPCorner Rotator Nozzle The MP Corner is an 8-15' (2.5-4.6 meter)sprinkler designed for tight corners that are difficult to irrigate properly with conventional sprinklers. It has an adjustable arc...
Hunter MP Rotator Nozzle 800SR 360 Degrees The Hunter Mp rotator short radius nozzle is ideal for smaller ares that require a distance of between 1.8n and 3.5 metres. The...
Hunter MP Rotator Nozzle 815SR 90-210 Degrees The Hunter Mp rotator short radius nozzle is ideal for smaller ares that require a distance of between 1.8n and 3.5 metres. The...
MP Rotator Key A tool for adjusting the MP Rotator sprinklers to the angle of which you would require. This is the simple and easy way to adjust it without...
MP Side Strip Rotator Nozzle The MP Side Strip irrigates a strip 5’ x 30’ (1.5-9.1 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing...
MP1000 Rotator Nozzle 210- 270 degrees 30% increased efficiency over conventional sprays The MP1000 Rotator is a 8-15' (2.5-4.6 meter) sprinkler (including the 25% radius reduction* capability) that fits...
MP1000 Rotator Nozzle 360 degrees 30% increased efficiency over conventional sprays The MP1000 Rotator is a 8-15' (2.5-4.6 meter) sprinkler (including the 25% radius reduction* capability) that fits any...
MP2000 Rotator Nozzle 210 - 270 degrees The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or...
MP2000 Rotator Nozzle 360 degrees The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub...
MP2000 Rotator Nozzle 90 - 210 degrees The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body...
Sale
Subscribe To Our Newsletter
Choosing a selection results in a full page refresh.
