Availability: Low stock: 20 left
Couldn't load pickup availability
£4.99 Standard 5 day shipping UK Mainland Excluding Highlands
DPD Next Day Service £8.99
SABA PVC cleaner is used to remove any oli films or other dirt that may effect the glue welds when using PVC fittings and pipe in high pressure environments.
1. Saw the tube at right angles and then file a bevel edge and remove any burs
2. Mark on the pipe the insertion debt of the tube.
3. Clean the tube and the coupling sleeve with SAVA PVC and ABS cleaner
4. Apply the glue evenly both to the tube and the sleeve. Apply a thick layer of adhesive to the tube and a light layer of glue around the sleeve in order o avoid surplus glue inside the tube.
5. Join immediately after gluing without twisting or tilting and hold tight for a few seconds. Remove any superfluous glue straight away.
6. The glued fitting should not be moved for 5 minutes (15 minutes if the temperature is below 10 centigrade.
7. Do not stress the pipe and fittings for the first 12 hours
8. Do not pressure test within 24 hours
