Punch pliers for pipe 16/20mm The punch pliers are normally for large installation that require many 100's of holes to be punched in to either 16 or 20mm LDPE Pipe....
Barbed Reducing Straight Connector 20mm - 16mm Used to reduce 20mm LDPE outside diameter pipe to 16mm. This is ideal when you are using long runs of pipe. Using 20mm...
Reducing Nipple 1" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 1" - 3/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 11/2" - 1" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 11/2" - 11/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 11/4" - 1" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 11/4" - 3/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 2" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 2" - 11/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 2" - 11/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Nipple 3/4" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How...
Reducing Socket 11/4" - 1" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU...
Reducing Socket 2" - 11/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU...
Reducing Socket 2" - 11/4" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU...
Reducing Socket 3/4" - 1/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU...
Reducing Push Fit Tee 20mm x20mm x16mm Can be used with any LDPE 20mm or 16mm. The connector is made from a strong industrial grade UV stabilsed plastic. The...
Rubber Washer For Back Nuts Suitable For 1" BSP Threads Rubber Back washer Made in Europe outside diameter40 mm Inside Dimeter of hole 30 mm Thickness 3mm width of rubber...
Rubber Washer For Back Nuts Suitable For 1/2" BSP Threads Rubber Back washer Made in Europe outside diameter 35 mm Inside Dimeter of hole 21mm Thickness 2mm width of rubber...
Sale
Subscribe To Our Newsletter
Choosing a selection results in a full page refresh.
